When not shopping online for lathe-electronics/parts I have been busy sanding the Pikanto moulds. First the last bits of 180-grit today, then all over with 240 grit, and finally started with 400 grit which I will have to continue with next in the next session. The flat bits and large gently curved areas of the hull are easy and quick to work with but as always the devil is in the details. The deck mould has a lot of edges and features that are tricky to sand, and all moulds have a sharp 90-degree edge which is easily damaged when handling the moulds.
The plan is to go 600-800-1200 grit next weekend and do a bit of polishing after that.
